In addition to cleaner cuts, better fuel efficiency, and increased safety, proper saw maintenance usually has the effect of increasing the lifespan of a saw. It usually reduces the risks of premature repairs while also increasing the return on the initial investment since the cost of buying it will be spread over a longer period. Here are saw maintenance tips that will come in handy in helping you to get the most out of your saw.
Use a pressure washer
Sawing concrete usually creates dust. When this dust gets mixed with water, it usually creates a slurry mixture. This mixture usually sticks onto the sides of a concrete machine and other hard-to-reach parts. Simply wiping the machine with a piece of cloth is rarely enough to get rid of all the accumulated dirt. This usually makes inspection harder while also increasing the rate of wear and tear of the moving parts of the saw.
To make sure that you get rid of all the after-sawing waste, use a pressure washer. Using it will ensure that any stuck particles are dislodged, even in hard-to-reach places. Doing so will ensure that you not only end up with a clean saw, but a saw whose system is free of friction-increasing particles that can increase the rate at which it wears out. There is also the fact that thorough cleaning can make detection of small tears and saw bends easier. And since early detection can prevent the need for extensive repairs, this will end up saving you a lot of money.
Grease the bearings
Blade shaft bearings usually help to reduce friction when the saw is in use and thus reduce the rate of wear and tear of the shaft. When these bearings wear out, their ability to reduce friction usually diminishes. This ends up leaving the saw vulnerable to accelerated wear and tear.
Making sure that you grease your bearings after use is advisable. For the best results, apply the grease when the saw's shaft is turning at idle speed. This will allow the grease to spread uniformly throughout the area and create a better friction-preventing coat.
Tension the blade shaft belt
When the tensioning of your belt is off, the belt can slip. When this happens, the resulting vibrations can not only end up damaging your saw's frame, but also increase the rate at which your saw's parts wear out. Therefore, if you notice a persistent squealing sound, it is advisable that you have your belt tensioned immediately. Doing this will not only guarantee smooth workflow in the future, but also spare your saw from the accelerated wear and tear that usually accompanies belt slips.
For more information, contact professionals like Concrete Coring Company.Share
12 July 2016
Hi there. My name is Murray Swanson. Welcome to my website about concrete contractors. When I started my home renovation project, I was stuck on what to do with the area outside my home. I knew I wanted to have a large circular driveway, but I did not know how to proceed with designing the pathways and other concrete structures. My contractors helped me create a perfect design and construct the pathways and driveway for my project. I will use this site to discuss all of the different services provided by concrete contractors. Please visit my website again soon to learn more.